How to make beautiful slopes on the door? (21 photos)

The installation of a new interior or front door negatively affects the appearance of the opening. In addition, there are cracks between the door and the opening, due to which heat and sound insulation are violated. High-quality slopes for entrance doors guarantee reliable protection against extraneous noise and heat loss. There are various options for finishing slopes using natural stone, PVC, laminate, MDF and other modern materials.

Door slope

Slopes for doors are parts of the wall on the other sides of the door frame. And if earlier they were used only to improve the opening, which was damaged after installing the door, then a wide range of materials made it possible to use them to decorate the doorway and space in general.

To understand how to make slopes on the doors, you need to imagine a layer cake. Each layer of material follows in a specific order. This allows for good thermal insulation, strength and visual attractiveness of the structure.

When finishing slopes, a rough layer is first performed. Its creation consists of the main stages:

1. The surface is thoroughly cleaned of debris and dust.
2. Application of primer on the surface of the opening. If slopes of the front door are made, it is recommended to put an additional layer of polystyrene to provide the necessary insulation.
3. A layer of plaster or drywall is laid. Performing door slopes with drywall allows you to quickly and better prepare the surface for finishing. Drywall decoration is more often used for interior doors. The use of this material is simpler than the use of plaster. It can be used for painting or other types of finishing.
4. Installation of a metal reinforcing corner at external corners. It remains only to putty and clean the slopes. The surface is primed again. Also, instead of drywall structures, you can use the finished frame.

The second and most critical step is the design of the slopes with a finish coating. In this case, you can use decorative stone, paint, wood panels, laminate, as well as slopes from MDF and other materials. Depending on the choice of material, the method of its fastening differs.

Popular ways to trim slopes

There are various ways to slope the front door and interior structures. In this case, various materials are used. Their choice depends on the type of door, the features of the opening and the design of the room as a whole. You can trim the slopes with plastic, wood, laminate, decorative stone and other decorative materials. Each option has a number of advantages and disadvantages and is optimally suited in each case.

Drywall

Making the doorway with drywall is a fairly popular, but at the same time labor-intensive process. After installing the sheets, it is necessary to putty it additionally, and then paint or wallpaper. Only in this case will the surface be neat and beautiful.

Sheets are pre-cut to size, and then installed using self-tapping screws. Joints are filled with foam or mortar.The disadvantage of this method of installing slopes is the fragility of the finish coating. Wallpaper on the slopes will quickly tear, and the painted surface will peel and get dirty.

Plaster

The most reliable and affordable way is to finish the slopes of the front door from the inside and outside with plaster. However, this option requires a certain level of skill of the master, and it will be problematic to plaster the slopes independently.

After completion of the draft work, the slopes can be decorated with paint, wallpaper or other finishing. The main disadvantage of plaster is the complexity of the work, a lot of time. In addition, plaster refers to dirty finishes.

Decorative plaster

Installation of slopes with decorative plaster is similar to the previous version. A decorative solution is applied to a previously applied solution layer. However, decorative plaster is textured, so the draft layer does not have to be perfectly even.

The advantages of this method include a wide color palette, the ability to perform work independently. In addition, you can purchase decorative plaster with the addition of stone chips. It is distinguished by external attractiveness and high strength. Among the minuses should be highlighted the high cost of materials and the complexity of the work.

MDF

Making slopes of the front door of the MDF is the simplest and fastest method of performing work. Slopes from the panels withstand a significant load without the formation of cracks or dents, they do not scratch, so their use is recommended even with significant operating loads.

The panels are installed without the use of special tools, and even a person without experience in construction can do it. However, MDF panels can only be used to design narrow slopes. Otherwise, unaesthetic seams will remain between them, which will ruin the appearance of the door.

Laminate

The slopes from the laminate to the front doors can be used even for deep openings. At the same time, the seams are almost invisible and turn out pretty nice. Such slopes for interior doors or entrance structures will cost inexpensively, but their modest appearance can ruin the impression of an expensive and high-quality door.

A rock

Decorating the slopes of the front door with decorative stone is one of the most beautiful and solid ways to design an opening. Decorating doors with decorative stone is a long and laborious process.

Decorative stone is perfect for a private house. After the slopes are made with artificial stone, the adjacent walls can be painted, covered with decorative plaster or glued with wallpaper. Only an experienced master will be able to carry out work independently.

Tree

External and internal slopes of the entrance doors can be decorated with wood. This option is suitable if the interior of the hallway is created in the same style. It is recommended to install those who prefer to use natural and environmentally friendly materials. Wooden slopes are inexpensive and easy to mount. However, to protect the material from damage, it is recommended to treat the wooden parts with special varnish or paint. In addition, they must be updated periodically.

Chipboard

One of the most affordable ways to design door slopes is the use of chipboard panels. As a rule, they are used with a large wall thickness. For slopes, this material is rarely used. It is not durable, does not tolerate mechanical damage and prolonged exposure to moisture.

PVC

Plastic slopes look neat, but simple enough. PVC panels are less durable than laminate, but their cost is much lower. They are not recommended for use with an iron door due to heavy loads.

Plastic panels are not afraid of moisture, therefore, they can be used to design slopes of doors to the bathroom or kitchen, and the installation of such panels does not require special materials or experience in the construction business.

When making slopes with plastic, fastening of a strip of plastic sheathing every 10 cm is required. The material is easy to care for and is quite durable when used on entrance and interior openings.

Tile

Slopes on the front door and interior structures made of tiles look very neat and beautiful. They have a high level of durability. It is extremely easy to care for, resistant to moisture. In addition to tiles, mosaics can be used, which makes it possible to create complex ornaments of various colors.

Tiles and mosaics are used for slopes on the front door to the apartment, as well as interior doors to the bathroom and kitchen. The slopes made will last for decades, will not be scratched and easily washed. However, their manufacture takes a lot of time even from an experienced craftsman.

Extras

It is extremely convenient when such structures are installed in the hallway, where there are several doors, for example, the entrance and doors to the bathroom and living room. This allows you to make boxes and slopes from the same type of material. The door device in this case will take less time, and the result will be a neat appearance of the hallway in any style. It’s extremely easy to mount. And the material from which they are made is much better than particleboard, plastic or laminate, but its cost will also be higher.

The choice of material for creating slopes depends on many factors. In this case, the type, size, weight and material of the doors, the place of their installation, the level of humidity and operating load should be taken into account. Materials for finishing slopes also vary in cost and complexity of the work, so to bring the doorway in proper form, it is better to contact professional craftsmen.