How to paint the gate: the choice of paint and technology

To paint the garage door is not as easy as it might seem. It is necessary to choose the right paint, and also be sure to follow the sequence of actions during the painting process. Professional masters know all these nuances, and ordinary people may not be familiar with them. Therefore, in the article we will consider the question - how to paint the garage door and find out how to choose the right paint.

What is required

What equipment and materials are needed in order to correctly paint the gate.

• Special paint designed for metal. Please note that it must be resistant to weather conditions: high humidity, frost and heat.
• Garden hose. It is needed in order to wash a wooden gate or metal gate with water pressure.
• Liquid detergent. Soap foam will make the surface clean, remove dirt. Note that a dirty surface will not be able to provide good adhesion of the paint - the coating will peel off quickly.
• Sandpaper to remove rust and sand.
• Primer for metal surfaces.
• Brush for painting ends and hard-to-reach surfaces.
• Roller in order to conveniently paint the main surface.
• Stepladder to get to the top of the gate.

Work stages

How to carry out the stages of work when painting the gate.

• The first step is to prepare the surface for applying paint. To do this: wash the wood or metal of the gate, clean it of old paint, and remove strong dirt and rust with an emery cloth.
• Removing grease from the surface of the gate. To do this, you need to treat the gate with a special solution. If you do not degrease the surface, the paint will not adhere well and will quickly peel off.
• Primer. Priming helps to make the working surface more even and more susceptible to paint. The coating will last longer and look better.
• After all these works, you should proceed to the final stage - paint forged or other gates.

Stages in more detail:

Cleansing

Without this first step, all further steps have no meaning. Apply paint only on a cleaned and properly prepared surface. Of particular importance is cleaning when the gate is old and painted more than once - in this case, most likely, they will have peeling old paint and a lot of rust.

If you do not pay enough attention to this stage, then fresh paint will not last long. It will fall off, the coating will peel off quickly, and the gate will lose their original beautiful appearance.

Coarse and medium abrasive sandpaper is the best that has been invented at the moment for cleaning metal gates. The abrasive surface easily copes with dirt, makes the surface smooth and clean. Sandpaper carefully polishes the metal surface, removes all dirt, the remains of old paint and rust from it. And the grooves that remain after abrasive treatment will provide better adhesion of the paint to the metal.

Degreasing

After the entire surface is properly cleaned, it is necessary to wash off all the dust and dirt from the gate, and then degrease it.

You can wash the gates with a large sponge dampened with plenty of soap and water.The soap foam is washed off usually with a garden hose - a strong pressure of water can rid the surface of any remaining contaminants.

Check all corners for dirt and rust. If there is, delete. And once again roll the gates from the hose.

In order to properly and efficiently degrease the forged gates, any strong solvent will do. We recommend an inexpensive White Spirit, which has proven itself and is suitable for outdoor use.

These preparatory work lead to the result that you get a smooth and clean gate or gate, completely ready for painting. After carrying out all the preparatory work, it is necessary that the gate dry out.

Primer

This manipulation ensures reliable adhesion of the paint to the metal surface of the door. If the gate is in the immediate vicinity of the fence or facade, porch, cover nearby surfaces with a newspaper or whatever you like so that the primer does not reach them.

The solution must be applied with a brush or, if the surface is large, with a spray. Try to get the primer not only on the gate, but also on the handles, bolts and other elements. After applying the primer, you must wait 10 hours, and only then paint the gate.

Dyeing

How to paint a garage door - talk about it.

It is best to paint large surfaces with a roller, and in the end with a brush to refine small parts. Masters recommend starting painting from above, so that the flowing paint with smudges and stains does not spoil the freshly processed surface.

To paint covered the entire surface without gaps and "bald patches", apply the composition in two parallel layers - and, the upper layer should overlap the bottom by a couple of centimeters.

Periodically move away from the gates and admire your creation from a long distance - it “closes” near your eyes, and we don’t notice many flaws. And from a distance you will see everything and you can fix it in time.

At the end, carefully paint over the ends and inaccessible places. To do this, it is better to use a brush.

After the work is completed, it takes a day for the paint to dry. Only after that meticulously evaluate the result: the original color of the dried paint is sometimes quite different from its liquid state.

How to choose a paint

With today's variety of paint and varnish assortment, it’s no wonder to get confused when choosing a paint. A few recommendations for choosing the right composition for painting iron gates.

Oil

This type of product is based on varnish - an oily substance that responds well to bad weather conditions, gives stability to the composition and provides it with anti-corrosion properties.

But despite the fact that the oil compounds tolerate heat and frost well, they react poorly to rain and excess humidity. Therefore, now their popularity for outdoor work has fallen considerably.

Acrylic

A more modern look of paints. Acrylic versions of the compositions look very beautiful, do not exude an unpleasant odor, however, they do not differ in resistance to precipitation and weather conditions. Therefore, they are not suitable for outdoor work.

Alkyd

This species is the most resistant to aggressive environmental influences. The garage, painted with alkyd paint, can withstand snow, frost, and intense heat. Alkyd compounds are also good because they "tightly" adhere to the surface, providing a reliable and durable long-term coating.

The downside is that alkyd compounds are quite toxic, so when working with them you need to take all safety measures - at least wear gloves and a respirator.

Hammer

This type of paint is famous for its enhanced anti-corrosion properties, so for external work they are what you need. Hammer options can also be used for internal door processing.This paint has an unusual name because of its original texture, which resembles a hammer-studded surface.

Advice

A few additional answers to the question - how to paint metal gates.

Paint the doors only in dry and warm weather so that the surface dries quickly. Do not do this in winter - high humidity will not be able to provide suitable conditions for drying. In windy weather, work is also undesirable - gusts can cause dust, leaves and dirt on a drying surface.

If you want to use a spray gun to evenly spray the composition, then note that this unit splashes paint not only the gate, but also everything that is next to them. Carefully cover all surfaces that you do not want to see painted. On a windy day, the use of a spray gun is prohibited due to the fact that the jet from it can fly completely in the wrong direction, as intended.