How to wash plastic windows: the secret of a housewife

Plastic windows do not lose their popularity from the moment of their appearance until now, and all because these products stand out against their predecessors with wooden frames and glass. Each person will surely feel the difference immediately after installation, but having become the happy owner of such a treasure, the question arises in the minds of many people: “How and with what can plastic windows be washed?”.

Product Care

I must say that for seasonal cleaning of plastic windows, special efforts are not necessary. Unlike glass analogues with a wooden frame, they do not require periodic painting and insulation. The only thing you need is to wash the windowsills and remove dirt from the glass, but here you already have to follow some rules.

Cleaning immediately after installation

Do not think that immediately after the arrival of specialists and the dismantling of old window constructions, your new plastic products will look like new. Upon completion of the installation, the film remains on the surface of the profile, and on the glass - various spots from adhesive tape, mounting foam and other materials that were used in the process. Do not delay the general cleaning of windows for the weekend or free time. The glue with which the protective film is held on the windows, under the influence of direct sunlight, can turn yellow and dry, and it will be extremely difficult to remove such contaminants after a week. In addition, during this time dust from the street will stick to it. And if the glass can be cleaned with any alcohol-containing spray, then the profiles in this matter are more demanding and capricious.

How to wash plastic windows after repair, if there are spots of concrete, putty or plaster on them?

If you set a goal and wash the traces of installation immediately after the departure of specialists, cleaning will not take much time. Things are much worse if building materials are already dry. In such cases, do not headlong run to the store and buy expensive chemicals.

Concrete, putty or plaster do not tolerate prolonged contact with water. Gradually, under its influence, they become soaked, and then the spots disappear in an instant.

How to wash tape from a plastic window?

The solution to this issue lies on the surface. Traces of scotch tape, that is, its remains, of course, must be removed. Then glue spots will remain on the surface of the glass or profile, which can be easily removed with a thin blade or clerical knife. Do not rush to use thicker tools such as a spatula. They are able to scratch the surface.

The same applies to all kinds of glass stickers. If they have a paper base, but they cannot be gently torn off with their fingers, take a spray bottle and spray the sticker with water. After a few minutes, the paper base will spread, and the glue can be easily removed as described above.

Here with labels on the type of tape you have to sweat.Sometimes such “applications” stick so strongly to the plastic that it is practically impossible to remove them. Pick up the thinnest and sharpest kitchen knife and pick up the corners of the sticker. Carefully lower the knife, with each movement of which the sticker will slowly detach. Residual glue can be removed with any chemical glass cleaner.

How to wash the mounting foam?

This building material is very difficult to wipe, so such pollution is better to prevent than to destroy. During the work of the craftsmen, make sure they wipe the mounting foam from the plastic windows whenever it hits the surface of the frame. If it was not possible to keep track of the formation of spots, the dried foam will have to be scraped with a knife.

A list of cleaning products to help quickly deal with such contaminants:

• Phenozol This name comes from the brand, a global manufacturer of plastic window care products. In the product line there is a product that does not contain various solvents that have a detrimental effect on the white color of the frames.
• Penosil is a European company engaged in the production of polyurethane foam and special construction adhesives. To launder these products from work surfaces, they launched Premium Foam Cleaner. With this cleaner you can remove stains even from the skin of a person and his clothes. The composition contains a small amount of solvent, but due to the presence of emollients, the tool does not harm the surface of the window profile.
• Dimexide. This drug is sold in pharmacies and is used for muscle pain or joint diseases. The dimethyl sulfoxide contained in the gel or solution helps clean the foam from the frame or glass. After applying the composition, you can wash the window with a soft cloth without the use of chemicals.

The drug can cause allergies, so work should be done with rubber gloves.

Do not use tools that contain solvents to clean the windowsill. Never use acetone! All these nitro compounds, of course, cannot affect the aesthetic data of polyvinyl chloride (PVC), but it will not be difficult for them to damage the glossy film or protective layer.

How to wash the paint?

This problem of all of the above is considered the most difficult to solve. Typically, such contaminants are well washed with acetone, which in our case is strictly contraindicated.

First, try to scrape off the spots with a blade. If this does not work with a knife, rub the problem areas with nail polish remover without acetone.

Water-based paint is removed using a construction or regular household hair dryer. Hold the working device near the spot for several minutes, the paint will soften and will be easily removed with a damp cloth.

We remove glue pollution

As mentioned earlier, if you do not remove the protective film from the glass and window sill of the plastic window in time, the glue will dry out. To remove such persistent contaminants, prepare a solution with 10 parts of water and 1 part of acetic acid. Treat with a rag soaked in this liquid the area where the glue residue is concentrated and begin to rub the surface with a sponge for dishes. The better the sponge, the faster you will see the result. The average duration of the procedure is 30-40 minutes.

Seasonal maintenance of plastic windows

The concept of a window includes such components as a profile, accessories, glass and even a sealant, so when wondering how to wash plastic windows from dirt, all these aspects should be taken into account.

We remove dirt from the profile

Detergents for plastic can be either specially created products for these purposes, or chemical products from ordinary stores. The most common product is a gel or dishwashing liquid.To wash the window sill with such a cleaner is as simple as that: it foams easily, does not contain solid particles and is quickly removed with a rag and water. No less effective is the good old soap solution, which is easy to dilute by pouring 10 parts of water and 1 part of soap into the basin.

After carrying out water procedures, remove the remaining foam from the windowsill and frame and polish the window in circular motions. Use microfiber cloths to wipe the surface.

We clean the glass

For high-quality glass cleaning, you can use Grandma’s technique with newspapers, when the surface is first treated with a soapy composition, and then wiped with paper until the stains are completely removed. Now the market is full of window cleaning products, so you can not complicate the work using paper.

We bring to an ideal state of fittings

Metal objects can be processed by any means. Such a cleaned surface is not afraid of alkali, nitrates and other chemicals. After the product has completely dried, apply special oil or special silicone grease to the joints.

How to save windows from yellowness?

If the window sill turned yellow, this can and should be fought. The yellowed product should be treated with the previously described means to remove contamination from the mounting foam. A mixture of perhydrol with powder bleach also helps. Dissolve one tablespoon of perhydrol and the same amount of powder bleach in 0.5 liter of water. Coat the surface of the windows with a solution, rub the surface with a cloth, dry thoroughly. If yellowness does not go away, repeat the procedure again.

Everyone knows that plastic windows can last more than a dozen years, but to maintain aesthetic appeal, it is necessary to regularly carry out wet cleaning. You must admit that the pollution visible on the glasses can completely spoil the feeling of comfort at home. Now you know how to clean plastic windows from stains of various nature, which means that such unpleasant moments will no longer affect you.