DIY bathroom: reality or money down the drain? (84 photos)
Content
A small bathroom plays a big role in the life of every household, we start our day with it and often this room is the last one we visit before going to bed. The role of the bathroom in the apartment is difficult to overestimate, therefore, the attention to this room is increased. Repairing this room requires serious financial investment, as it traditionally combines finishing work and replacing plumbing. Is there a chance to save without sacrificing the end result? This can only be done if you repair the bathroom with your own hands, which will reduce costs by 40-50%.
Overhaul of the bathroom in Khrushchev with their own hands seems to be a simple matter, and many property owners easily decide on this event. In apartments of improved layout, a large bathroom raises some doubts not only in the volume of work, but also in the complexity of communications. However, today plastic sewer pipes and water pipes made of cermets are more reminiscent of a designer, which every home craftsman can handle. Do not be afraid, because a renovated bathroom with your own hands will save a decent amount.
How do I repair a bathroom with my own hands?
Repair is worth the key, most of the materials used, pipes and plumbing have approximately the same service life. To dismantle a bathtub for laying floor tiles and then perform this operation again after 4-5 years to change pipes is not rational. Easy redecoration in the bathroom with your own hands is the lot of new settlers who settle in a house whose age does not exceed 3-4 years. In all other cases, a major update is recommended, similar to repairing a bathroom in Khrushchev - with a complete replacement or a complete audit of communications.
The repair of an ordinary bathroom should begin with the design. At this stage, a budget is planned, measurements are made, based on which the amount of necessary materials is calculated. It is necessary to buy everything in advance, since it is better not to delay the repair of the bathroom and toilet for a long time. Households will not understand this.
The first stage is dismantling, during which the old bath or shower cabin is removed and removed, mixers, taps and showers are removed. The following operations are performed:
- old tiles get off the walls and floor;
- plastic panels or moisture-proof drywall are removed from the ceiling if there is a similar finish;
- Sewer pipes and old water pipes are dismantled right up to the points of entry of communications into the apartment.
As a result, the room remains in its original form, in which it appeared before the finishers after the main construction work.
It is recommended to repair and waterproof the floor, this will protect against leaks, which, unfortunately, are not rare in urban apartments. To do this, cracks are repaired by repair compounds, after which the walls are covered with a special waterproofing polymer composition to a height of 10-15 cm.They are distinguished by ease of application and a short polymerization time, which will allow not to delay the repair work.
DIY bathroom repair communications
The most difficult repair step for many home masters is the laying of communications. Modern materials allow you to abandon welding machines and the services of professional plumbers. To supply cold and hot water, you can choose polypropylene or metal-plastic pipes. A wide range of fittings allows you to route the most complex configurations.
The appearance of PVC pipes for sewage has allowed to abandon any other materials when laying this type of communications. They are lightweight, durable, disassembled and assembled very simply, which allows in the case of blockages to quickly clean the pipe. A wide range of fittings helps to assemble and tighten the system.
How to repair the ceiling in the bathroom with your own hands
Everyone can make a beautiful ceiling in the bathroom with their own hands today, thanks to the presence of materials such as laminate and plastic lining. In most cases, neutral white PVC panels are chosen. The dimensions of the room are small, so it is not recommended to use a dark finishing material. For even ceilings, the panels can be glued with mounting glue. If alignment is necessary and enough height - it is worth using the profile system for drywall. It is based on components made of galvanized steel, which will last a long time in conditions of high humidity.
An alternative is the rack ceiling, but its cost is higher than the guides for gypsum board and plastic panels. Both systems allow you to embed the original lighting system into the ceiling, which will add additional appeal to the interior. It is not worth fearing that the panels accidentally peel off, weaken and fall. Proper installation provides a solid and reliable fixation, and after finishing with bathroom tiles, additional support will appear on the ceiling.
How to make a beautiful floor in the bathroom with your own hands
The main material for finishing the floor in the bathroom is ceramic tile, the alternative of which is porcelain tile or clinker tile. More original ideas for the bathroom include the use of a laminate based on PVC or natural wood - waterproof teak. These materials have a high cost and are not suitable for budget repairs.
Small bathrooms and rooms of complex shape require a special approach when working with floor tiles. It is recommended to install from the door towards the place where the bath will be installed. In this case, the tile that will have to be trimmed will be hidden from view. It is optimal to use 300x300 mm tile, which is laid according to seamless technology. For work, special glue for floor tiles is used, which is applied with a notched trowel. Using a building level will make the floor in the bathroom do-it-yourself perfectly flat.
Elegant and practical do-it-yourself bathroom walls
The use of ceramic tiles allows you to beautifully design a bathroom in any style. Manufacturers offer a wide selection of collections that mimic natural stone, precious wood, and expensive varieties of leather. Despite this diversity, many prefer a marine-style design and acquire inexpensive ceramics in turquoise colors.
Do-it-yourself bathroom decoration is beautifully done by the decorative elements that go to collections of all major manufacturers. These are various panels, borders and decorative tiles with a pattern. Decoration does not cause difficulties, since all these elements have dimensions corresponding to the base tile. DIY decor for the bathroom is glued using the same technology as ordinary tiles. A technique with cutting seams is used.For this, crosses are used, with the help of which seams are formed, subsequently filled with waterproof grout.
The tiles are mounted from bottom to top, using the glue recommended for ceramics of the selected format. You can start installation around the entire perimeter from the floor tiles. The second option is to start work under the bathtub from the third row in order to prevent its slipping, a galvanized steel strip is mounted on the wall.
To make a bathroom decor with your own hands pleased for a long time with its spectacular design, you need to make a layout on a sheet of paper. The tile that sticks to the outlet of communications must be pre-drilled using crowns of the desired diameter. The radius of the hole should be slightly larger than the diameter of the pipe, a small gap can be repaired with grout for ceramic tiles. Adhering to these simple rules, you can make the walls in the bathroom with your own hands qualitatively and beautifully. An alternative to ceramic tile can be plastic panels, the installation of which is carried out on a profile for gypsum board.
DIY repair final stage
After the interior of the bathroom is ready, it remains to install plumbing. It all starts with the installation and connection of the bath. Manufacturers today offer a wide selection of acrylic models, attracting light weight and elegant design. You can mount such a bath yourself, but installing a cast-iron bath will require help. Models of this material are heavy, but attracted by their durability and excellent thermal performance. They keep warm for a long time, which will be appreciated by those who like to take water procedures for a long time.
Complete overhaul and redecorating in the bathroom by installing a sink, taps and shower, heated towel rail. You can perform additional decoration of the room, but its dimensions rarely allow the installation of pleasant, but not practical trifles. The final touch is the installation of platbands on the door from the inside of the bathroom.
With proper planning, a careful selection of materials and the study of work technologies, everyone can repair in the bathroom. It is very important to purchase all the tools, finishing and building materials in advance. This will make repairs faster and more efficient, better quality and easier. It is worth avoiding situations when glue is prepared, and crosses for tiles have ended or one border was not enough to complete the finish. Do-it-yourself repair in the bathroom is a great way to save on the services of builders and purchase better, modern finishing materials.