Mixer on board the bath: design features (20 photos)

The owners of modern apartments strive to equip the home as comfortable as possible. Fortunately, manufacturers of home goods offer a variety of new products that can satisfy the highest demands on quality and ergonomics.

The bathroom is no exception, because it is a cozy corner where you can relax, relieve stress and calm down after a hard day's work. Thanks to technological innovations, you can significantly save free space, ensure the availability and ease of use of plumbing. This is true for small bathrooms, where in addition to the main equipment you need to place other accessories. However, they look great in rooms of any size.

A large number of competitors in the field of sanitary fixtures defines a wide range of products offered in specialized stores. Here are models with different functional characteristics. Original design solutions guarantee the satisfaction of the needs of the most demanding customers. However, before buying, you should familiarize yourself with some information.

Mortise mixer - what is it?

The mortise mixer replaced the wall mixer, which was attached to a vertical surface. Such devices were quite convenient to use, but took up a lot of free space. In many bathrooms common faucets were installed: for bathtubs and sinks, which very quickly failed due to their constant use. Now the equipment for built-in installation, which is used both for bathtubs and for a jacuzzi, is very popular.

One of these devices is a mixer on board the bath, which can be purchased and installed independently. Of course, if you need to buy a new bath, you can pay attention to the models that were originally equipped with all the necessary accessories.

Such designs look aesthetically pleasing and stylish, they do not occupy much free space, and all additional attributes are safely hidden from prying eyes. The mixer on board the bathtub with shower delivers an even and powerful flow of water, which is not sprayed and fills the tank in a matter of minutes.

The mixer on board is always at hand, therefore, when taking a bath, there is no need to protrude from it to change the pressure or temperature of the water.

What are the advantages of mortise mixers?

Comparing the mortise mixer with other types of bathroom accessories, the following advantages can be noted:

• Attractive design
• Functionality;
• Ergonomic
• Strength and durability;
• Hidden extras;
• Ease of use.

Having considered the positive aspects of the product, you should pay attention to the negative.

What are their disadvantages?

The built-in design practically does not have them, however, a significant drawback is the need for frequent replacement of the shower hose due to its rapid wear.

Manufacturers of sanitary products did not stop there, they offer a wide range of developments, including a cascade mixer on board the bath, as well as a backlit mixer. These latest achievements are successfully implemented in the design of modern rooms with a jacuzzi. What are they and what are their benefits?

Cascade mixer

Thanks to the imagination of the developers, the most interesting ideas come to life. Now it becomes possible to enjoy the view of a miniature waterfall in the bathroom. The special shape of the mixer directs the stream of water in the form of a flat and wide stream that looks “flattened”. Water flows down the side and gives the impression of a falling mountain stream or a seething spring.

This type of bath accessory has maximum throughput, therefore, it provides fast filling of the tank with water without unnecessary noise (about 25 liters per minute).

It is installed on board the bathtub or jacuzzi in the same way as the usual classic model. The necessary fasteners are usually supplied as a set. Adjustment of the design is carried out both by ball and valve mechanism. In cascading models, the option of hydromassage is provided.

Illuminated mixer

The backlight is installed to the cascade mixer on the side of the bathtub or jacuzzi, and it can also be mounted on the wall or on the sink. In any case, the effect will be amazing. This original solution will not leave anyone indifferent.

There are many options for backlighting: it changes depending on the temperature, at will or remains the same color. Every day you can choose the colors that are in the best way in harmony with the mood.

Given the design of the room, contrasting shades or laconic colors of the backlight are chosen - it all depends on personal preferences, the main thing is that the romantic mood is provided to all vacationers.

How to install the mixer yourself?

Everyone can mount a mixer on board an acrylic bath. You just need to stock up on patience, free time and the necessary tools. For installation you will need: an adjustable wrench, a drill with nozzles and screwdrivers. Before starting work, you need to make sure that the width of the side exceeds 7 cm - this is the surface necessary for the correct location of all units. The choice of mounting location also plays an important role, it is advisable to prefer such that when entering and leaving the bathroom, as well as when the mixer is located in it, it does not cause additional discomfort.

Next you need to follow the following instructions:

• Mark the surface of the side;
• Using a hole saw, drill holes of the desired diameter;
• Install the mixer, pre-laying a gasket under it, and fix all the parts with an adjustable wrench and nuts;
• Connect it to the water supply using special hoses.

The single-lever mixer is fixed in a different way: for this, a pin is screwed under it, and a steel half-washer is put on it. Then it is pulled to the side and the nut is tightened.

Methods for installing on-board structures

Depending on the version of the product, there are two installation methods: external and hidden. In the first case, the mixers are made in the form of a monoblock mounted on board and consisting of the following parts:

• Working part;
• Spout;
• Gates
• Watering can;
• Hose.

The water mixing unit is located under the unit.

In the second case, only the following details are on the surface of the bathtub or jacuzzi:

• Spout;
• Gates
• Watering can.

The remaining units are located under it. This installation method makes it possible to arrange all the external elements of the mixer in any order, however, for this you will need to drill several holes.

What materials are the mixers made of?

Naturally, the quality of the product depends on the material from which it is made. Brass plumbing accessories are considered the most popular and for many years occupy high positions.

Bronze products are worthy of competition with brass and are distinguished by excellent performance. What are the benefits of a bronze mixer on board a bathtub? So this is:

• Resistance to temperature extremes;
• Resistance to corrosion;
• Reliability;
• Long service life.

The high cost of these products, unfortunately, contributes to the loss of customer interest in them; cheap products imported from China appear in the markets and are in great demand.

Among the many new products can be noted products from silumin - an alloy of aluminum and silicon. This material is used mainly for the production of various fakes, it is characterized by fragility and fragility, so such a mixer can easily crack.

To give a spectacular appearance, the base of the device is covered with various compositions and materials, among which chromium or nickel can be noted. Chrome products do not cause allergies, have a beautiful shine and are environmentally friendly. In addition, such surfaces are a negative environment for the spread of bacteria and harmful microorganisms. Other materials used to coat the external surfaces of parts may be bronze or gilding.

To decorate the pens, wood, glass, crystal, malachite, marble, onyx and precious stones are used. This finish is used to add exclusivity to the bathroom.

What to look for when choosing a mixer?

The modern market is flooded with various models of household plumbing fixtures. How not to get lost in the variety of goods and choose the right product? When choosing, one should take into account not only its functional purpose, but also:

• Quality of materials;
• Reliability and durability of the product;
• The possibility of subsequent repair;
• Convenience of operation and installation;
• Harmonious combination with the overall design of the bathroom;
• Ability to dock all nodes;
• Functionality with shower and bath.

Only after careful planning and consideration of the repair work, you can begin to choose the right model.

The installation of the mixer on board has been used recently: since the advent of acrylic bathtubs. Having made a hole of the required size in the right place, you can easily install the device. The room will get a neat appearance, and the usability of it can be estimated after the first visit to the bathroom.