Vertical garage door: features and varieties (25 photos)

When arranging your garage, it is important to think through each element, but special attention should be paid to the gate. The fact is that it is they who carry out the main protection of the premises from unauthorized hacking and from theft of the vehicle. The modern market offers many types of these components, but the most popular are vertical garage doors. The design of these input devices has the maximum convenience and increased protection, but it is better to carefully study their features before using this type of gate.

Features of vertical gates

Vertical gates are often used for a garage. These designs offer maximum convenience, while providing enhanced protection against unauthorized entry into the garage. In addition, if you carefully study the features of these models, you can do them yourself, but first you need to understand what constitutes the device of these elements.

Typically, these garage doors consist of a single piece of canvas, which may vary in appearance. Additionally, they are equipped with a lifting mechanism, with which you can raise and lower the canvas. Products of this type come in different types, they differ in the type of canvas and the method of opening.

Varieties of vertical gates

Usually there are three varieties:

• lifting and swiveling. The device of these models consists of a single web. It is opened using the articulated lever mechanism, which raises the canvas up, rotates it 90 degrees, and only then it is placed along the ceiling;
• sectional door. These models are considered the most popular, their canvas is divided into 4-6 parts. The canvas at these gates is retracted along the guides and fixed in a horizontal position, along the surface of the ceiling. Sectional doors are often used as input garages;
• rolled or rolling. The canvas of these models is usually divided in horizontal projection into strips with a width of 5-10 centimeters. When opening the cloth is wound up in the form of a roll.

Vertical designs have one positive feature. All varieties have easy controls, to open them does not require much effort. A special automatic system provides easy lifting and lowering of the canvas.

Advantages and disadvantages

When choosing a vertical folding door for a garage, it is imperative to consider their positive and negative qualities. The duration of operation and ease of use depend on them.

Lifting and swiveling

Lifting and swinging gates with vertical lifting have a rather complicated device, in order to make them you need to have some initial skills and knowledge in the field of engineering design. However, since the gates consist of a solid and even cloth, they have maximum protection against the entry of thieves into the premises. To facilitate movement, a device of this design is equipped with spring counterweights. For this reason, a very small force is applied when opening, while it can be independently adjusted.

These lifting gates have a number of positive qualities:

• systems have increased protection against unauthorized entry into the room;
• the whole canvas has increased strength, it is able to withstand heavy loads;
• easy and simple automatic control, which does not require special efforts;
• if necessary, there is the possibility of arranging the gate.

There are negative qualities of these designs:

• it’s hard to make it yourself, it requires skills in the field of engineering design, it is also necessary to produce special drawings;
• difficult installation;
• in order to establish this type it is necessary to increase the height of the garage;
• high price. The average price in a simple version without installation is about 30 thousand rubles.

Despite the fact that these designs have negative qualities, they are still in high demand. Their popularity is associated with the high level of protection that they provide.

Hoisting

There is another kind of hoisting and swinging structures - hoisting and swinging. These models are also quite difficult to do with your own hands, but many successfully make these devices in accordance with their preferences. To facilitate the work, the system of counterweights is organized on the basis of chain hoists. The process of raising and lowering is carried out due to the link transmission.

The positive qualities of these models are almost the same as those of the lifting and turning ones - high protection, good strength, easy operation.

However, these devices also have disadvantages. Installation of these structures can be carried out only once, this task should be entrusted only by a professional, because they cope with this task quite successfully.

When opening the lift-and-swing garage height may decrease by 60-70 cm, but this is not so noticeable. There are also some small negative qualities:

• when opening the gate can damage or scratch the car, it depends on the care of the owner;
• some difficulties may arise when mounting and adjusting the balances;
• Gaps and crevices may be present.

When choosing, you must carefully study the positive and negative qualities of these products. It is worth weighing the pros and cons. It is best to consult with professionals in advance and study the information on the Internet.

Sectional

Sectional doors are often used to equip a garage, the fact is that they are very convenient and easy to manage. You can also make the gates with your own hands, but nevertheless, you should first carefully read the drawings and projects for the manufacture of these structures.

In addition, these products have a number of positive qualities:

• strong and reliable design that can withstand high loads;
• easy and simple automatic adjustment allows you to easily open and close the gates without using force;
• sectional doors provide increased thermoregulation, for this reason, increased dampness, mold will never form in the garage.

However, sectional lifting gates have negative qualities. They have limitations in width, for this reason they can only be used for a regular private garage, these models will not work for large garage spaces. It is quite difficult to mount a gate into these sectional vertical structures; only a small window can be inserted into them.

There are also several more disadvantages:

• sectional doors have complex installation, this task should be entrusted to experienced professionals;
• high price. Standard sectional doors with a size of 2 meters by 2 meters will cost an average of 25 thousand rubles;
• sectional structures have reduced protection against unwanted visitors from entering the garage.

These products are suitable for private garages. Many consumers who actively use these systems confidently claim that the blade provides high protection for their car.

Rolled or Rolled

A type of door with a horizontal sliding mechanism can also be used for a garage. This garage door is designed to automatically open and close. The canvas has narrow strips with a width of 5-7 centimeters, wound on a drum, which is placed in a decorative case and fixed inside or outside the garage. Additionally included is a device with which the gate can be opened manually.

The positive qualities of these gates include the following advantages:

• simple installation;
• lightweight construction;
• In order to install this type of gate, minimum requirements for the opening and structure are required;
• low cost. Standard rolling gates can be bought for 16 thousand rubles.

The following disadvantages can be attributed to negative qualities:

• a device of this type have low vandal resistance;
• have a complex mechanization device;
• it is not possible to install a gate in the design of rolling gates;
• have low thermal insulation.

Rolling or rolling gates are usually used not to protect the garage, but as a decorative fence, but in the modern market you can find models with thick and durable models, although at the same time they have an increased price.

In any case, before choosing vertical structures for a garage, it is worth considering their main features. It is better to consult with professionals in advance, because it is the specialists who will be able to choose a reliable and durable structure that will protect the garage from unauthorized entry. If you want to make these products yourself, then you should first consider the drawings and designs of these structures.