Pillars for the fence: the main types, features and advantages (21 photos)

An integral component of a suburban area is its enclosing structure. A fence made of high-quality beautiful materials should fit into the overall picture of the local area and be in harmony with the style decision of the house.

The fence should perform not only an aesthetic function, but also the main - protective. Noises from the street, dust and prying eyes should not get on the site. The strength and reliability of the fence design directly depends on the material from which the supports or poles are made, and the method of their immersion in the ground.

Like walling materials, the types of pillars for fences are different.

Driven posts

Hammer fence supports are the easiest and most economical method of immersing pillars in the ground. It is recommended for temporary fences, for example, under construction. The reason for this is the unreliable fixation of the column in the ground. A clogged pipe will quickly collapse if there is no concreting due to moisture penetration. Even if it was previously painted. The question of the construction of reliable supports for fencing with clogging pillars cannot be solved.

Wooden posts

This once traditional material for the construction of fences and their constituent structures is increasingly being replaced by modern materials. However, a wooden fence is an inexpensive and affordable way to fence.

Wooden fence posts have a short life, which can be extended after processing with special compounds that protect the wood from decay and pests.
The need for annual processing of wooden poles makes the operation of such a fence troublesome.

If, nevertheless, the choice fell on wooden poles for the fence, then it is important to know some of the nuances of their use:

• Coniferous wood is least susceptible to decay;
• Oak pillars will be the most durable;
• The use of timber is not recommended due to the fact that it does not have a protective layer against rot;
• Protecting a wooden pillar from direct contact with the soil, a steel pipe is installed on its lower part or it is fired and a resin layer is applied. You can also apply antiseptics or stain the surface of the column;
• When choosing wooden poles for a fence, it is necessary to pay attention that there are no defects on their surface: chips, cracks and other damages;
• The advantage should be given to supports made of solid wood.

The positive qualities of wooden poles include low cost, ease of installation, the possibility of self-production, environmental friendliness and noble, natural, appearance of the selected surface.

A wooden pillar can have various shapes, it can be painted or various decoration options applied. The disadvantages will be sensitivity to precipitation and low service life.

Pillars of stone

Stone has been used for many years in building fences as often as wood. But it was distinguished from the latter by its durability and long service life. Manufacturers offer many decorative stone materials:

• Cobblestone. It is also called a boulder stone. This is the most economical option with very high strength.It has a rounded shape, which makes the surface of the fence embossed. To obtain a smooth texture, the boulder can be divided into two parts.
• Pebbles. Due to its small size, it is used in combination with larger products. To make the fence strong, it is recommended to choose a brick as the material for the corners and base.
• Dolomite. It has a flat shape and different dimensions.
• Shell rock and marble limestone. With its softness, this breed is strong enough for the construction of fence posts. Moisture is quickly absorbed into the limestone, but also evaporates quickly due to its porosity. Water repellent treatment improves the performance of this material.
• Sandstone. A common material with moisture and frost resistance. When processing, you can achieve a smooth polished surface.

By installing pillars for the fence of stone, you can be sure that they will last a long time and harmoniously fit into the surrounding landscape.

Metal posts

Most often used such columns for the fence from corrugated board. This is a long-lasting and cost-effective option, since it does not require a foundation and is suitable for fencing large areas.

In order for the fence from the profiled sheet to stand for a long time, metal posts are firmly fixed in the soil by means of concreting, primed and enameled on their surface. On top of it, if it is hollow inside, a special plug is installed, the material of which can be durable plastic.

The fence posts made of corrugated board can be made of galvanized steel. It can be round pillars or supports with a square section. Galvanized fence posts can withstand significant loads. They are practical, not subject to corrosion and have an affordable cost.

Decorative metal posts for the fence have forged elements on their surface.

Concrete pillars

Concrete pillars for the fence will serve no less than metal posts. Significant weight of the structure will guarantee stability on any ground.

The positive properties include:

• The material is not afraid of moisture, rust and temperature jumps;
• Such a support for a fence post has high reliability and a long service life;
• Its surface can be subjected to additional finishing: facing, painting, plastering;
• The possibility of a monolithic construction device or the use of stacked pillars having various shapes and sizes;
• In the "body" of the column, you can mount wiring, which will allow you to install light sources on the top of the support;
• Easy to install and maintain.

Minuses:

• Concrete pillars for the fence require preliminary preparation of the foundation in terms of reinforcement;
• Concrete fence posts have significant weight. For the delivery of products to the construction site will have to attract special equipment, and this entails considerable costs.

Concrete pillars for the fence can have different shapes: round, semicircular, square, rectangular, trapezoidal.

Reinforced Concrete Pillars

Concrete poles reinforced with metal reinforcement are included in the concrete goods category.

Positive characteristics include:

• Simplicity of designs;
• Affordable cost;
• Technological manufacturing;
• Long service life;
• Bio and chemical resistance;
• Resistance to dynamic and static loads.

Reinforced concrete pillars for the fence, with their considerable weight, have little strength - the impact of the payload on it is less than the impact of its own weight.

Brick pillars

A fence with brick pillars will look neat and thorough. Installation of the support will be long and labor-intensive - it will require reinforcement of each row with reinforcing tape. The distance between the fence posts should be no more than three meters to give the necessary rigidity and aesthetic appearance.

Pillars made of brick from above should be protected from destruction by special caps that have a slope for rainfall to drain.

To concrete the supports, a monolithic strip reinforced concrete foundation is arranged, the width of which is the width of the column. The installation of such pillars will require significant financial investments. But as a result, a reliable durable fence will appear, which will not require special care, will last for many years.

An easier and faster option would be the construction of pillars from foam blocks.

Screw posts

Screw support for the fence is the fastest way to install a durable fence, regardless of the quality of the soil.

The steel pipe, at the end of which a cutting blade is made, is easily screwed into any soil and makes the support reliable and stable. Thanks to this device, no foundation is required.

Positive traits:

• Screw columns for the fence are treated with an anti-corrosion compound, which ensures their durability;
• For installation there is no need for preliminary preparation of the territory;
• Ability to install on a sloping surface;
• Simple installation;
• Suitable for organizing temporary fencing - can be dismantled and moved for reuse;
• They do not contain harmful substances on their surface, therefore they are safe for the soil into which they are mounted.

By installing screw posts for the fence, you can be sure of their reliability and durability.

Plastic posts

Plastic is also widely used for the construction of fences in suburban areas. In the hardware store you can choose a ready-made kit with the presence of plastic forms, poles, brackets, crossbars, pipes and boards.

Pillars made of plastic can be made in various colors. A pillar made of plastic can last for many years, it will never rust.

The installation of plastic fences is very simple and takes little time: with the help of anchor bolts, the posts are fixed on a concrete foundation. Then there is the installation of horizontal bars and plastic panels.

With all the variety of building materials that can be used for the manufacture of posts of suburban fencing, it is important to choose high-quality and durable.