Laying tiles diagonally: useful recommendations (24 photos)

To decorate various rooms in apartments, diagonal tiles are often used. There are many reasons for using this technique. Mostly, a similar method is used to visually increase the space and hide various defects on the wall.

The technology of laying tiles diagonally requires compliance with certain nuances. When planning this type of installation, it is extremely important to make a quality calculation. As a rule, tile consumption will be much less than with the standard laying method, which will save on material. When solving this issue, it is recommended to be guided by the following tips:

• When marking, it is not necessary to carry out the main diagonal. This is due to the fact that the corners of the room are not always straight. The corners may turn out to be uneven, and the tile consumption will be large. It is rational to use an isosceles triangle. That is, from corners it will be required to postpone segments having the same length.
• Laying ceramic tiles diagonally is required to be carried out, starting with a complete element. This will help make the floor more attractive.
• The laying base must be of high quality and even. If there are a lot of bumps left, you will have to buy more material. If there are any irregularities or roughnesses, then they can be removed using a cement-sand screed. If the defects are minor, then tile adhesive will help.
• If the room is characterized by a high level of humidity, then when laying it is better to use tile glue.

It is extremely important to correctly calculate the tiles laid diagonally. For this, mainly two methods are used. The first method is that the base area is divided into tile parameters. The second way is that you need to calculate the integer number of tiles needed for a certain area. Please note that there may be clippings. An additional number of tiles should be added.

Laying tiles diagonally is a difficult way to cladding. The appearance of the finish can be plain or multi-colored, with original inserts. As a rule, colored elements are mounted in the central part of the floor or ceiling. Often used carpet method of laying.

How to correctly stick the tiles diagonally on the floor?

Laying tiles diagonally is a time-consuming process. Previously, you will need to correctly perform the markup. It is also necessary to determine the direction, performing such work as laying tiles on the floor diagonally. All installation work is divided into the following stages:

1. On the edge of the first row, it is necessary to pull a nylon thread. It is installed between dowels, which are hammered into the screed. The thread must be pulled in level. If necessary, you can use a laser.
2. The base of the floor must be cleaned and treated using a deep penetration primer. This will help to significantly increase adhesion. The primer must dry for two hours.
3. You will need to prepare an adhesive mixture. Mixing is carried out according to a certain technique. Cooking is necessary in the amount that will be consumed within an hour.
4. From the beginning of work, it is necessary to carry out the installation of the first element. The first tile must be whole. This makes it possible to reduce the number of undercuts. Moreover, the whole tile is much easier to set in level.
5. The tile will need to be pressed firmly to the base. In this case, a little tap with a rubber mallet. The glue will protrude slightly around the edges.
6. Using the spirit level, we check the quality of the installation.
7. If you want to make a cut, then use a grinder equipped with an abrasive wheel.
8. Between the tiles should be the same seam. Realize this task will help plastic crosses. Their thickness should be 2-5 millimeters.
9. Excess glue from the facing material is carefully removed using a dry cloth.
10. After a certain period of time, you will need to carefully remove the crosses with gentle movements. All seams are processed using grout.

If you decide to cut the tiles or tiles, it is recommended to use high-quality equipment. In order to perform high-quality facing of the floor covering diagonally, materials such as tiles in the right amount, glue, rubber hammer, putty knife, rags, brush, roller, clean water will be required. Laying tiles on the floor diagonally requires the experience of a master.

Features of ceiling tile

Tile on the diagonal is often laid on the ceiling. As a rule, polystyrene tiles are used for the ceiling. This work is also carried out in compliance with certain stages:

1. Implementation of the preparation of the base surface. The ceiling is cleaned of whitewash or plaster. It should be clean and even. If there are any defects, then they must be putty.
2. Determination of the center of the ceiling. From the center, marking is performed. The midpoints of the opposite sides must be connected alternately using a masking cord.
3. Designation of the diagonal on the base of the ceiling. She must connect the corners. All of these lines should be connected in the center of the ceiling.
4. The distribution of the square in the central part of the ceiling. Its side should be equal to the side of the smallest wall. Then you need to draw diagonals that will intersect with each other at right angles. Tiles should be glued along one and the second diagonal. Then the rest of the area is filled.
5. Fixing the first tiles. If the intersection of the diagonals is carried out at a right angle, then the first tiles must be fixed in the center of the ceiling, along the diagonals.
6. Glue removal. The adhesive mass that protrudes between the tiles is removed using a dry cloth. All seams are carefully sealed using a spatula.
7. Fixing the ceiling skirting.

How to choose the material and tool for laying diagonally: the secrets of the master

The quality of laying tile material in many respects depends on a competent selection of materials and tools. The diagonal is a visual deception that makes it possible to competently increase the space by veiling its defects. In the process of this work, special attention should be paid to the choice of a measuring tool. Do not use your eye, because the human factor has not been canceled. The type of measuring tool can be any. The main thing is that he should be able to properly perform his work.

As for the purchase of the facing material itself, it must be of high quality. It is better to make a purchase from trusted manufacturers. For flooring, materials such as tiles, ceramic tiles, PVC tiles, porcelain tiles and others are widely used. When choosing a material, pay particular attention to the type of tile, operating conditions.

So, for the bathroom it is better to choose a wear-resistant material. For the kitchen, as a rule, material of the third class of abrasion is used.Before you go to the store, you must correctly calculate the surface area. It is better to make a purchase with a small margin.

The diagonal way of laying is quite complicated. It requires basic facing skills. The drawing should be even and positioned at an angle equal to 45 degrees. If the tile is laid correctly, it will last a long time.