Doors for a bath: features of the choice (20 photos)

During the construction and arrangement of the bath, more attention is paid to the shelves, decoration and stove, but the door for the bath is allocated much less time. However, this is a completely wrong approach, because the doors must meet a number of requirements. They are operated in rather extreme conditions and must withstand high temperature, moisture and steam, so for such an attribute as the entrance door to the bath to serve for a long time and as efficiently as possible, you should take into account the characteristics of the product.

Highlights of Choice

The most common choices are doors made of wood, glass, metal and plastic, the latter being installed at the entrance from the street. It is these materials that can guarantee quality, reliability and durability.

Resistance to different temperature conditions

Glass doors for a bath can withstand temperatures up to 800 ° C. These should be special models that are made of tempered glass. Another plus is that they themselves do not heat up much. In addition, they meet fire safety requirements.

Wooden doors for a bath are also able to withstand high temperatures, but they heat less. Regarding fire safety, they are clearly inferior to glass. Unlike saunas, here you can use pine and spruce.

Resistance to deformation

Regarding glass, it does not absorb moisture and does not react with water, so it cannot be deformed during operation.

If we talk about wood, they must be properly processed with special means that will protect from moisture and water. The door is better to choose lime or cedar, and the frame is made of oak or alder.

Wear resistance

Any surface over time requires replacement or repair work. The tree can be sanded and reinstalled at any time, such manipulations do not require expenses and large expenditures of forces.

Glass in this case is more profitable, since it does not require prophylaxis, simple maintenance during operation is sufficient.

Fumes

For example, doors from aspen for a bath will emit useful substances during heating, just like from fir or linden. A material such as glass does not emit any chemicals, since during smelting and processing, all substances burn out.

Care and appearance

In the case of glass, frosting is used - it is quite practical and beautiful. Such a frosted glass finish requires minimal maintenance, such doors are easy to clean with special means for alcohol. In addition, stains and prints that remain on ordinary glass are not visible on such a surface. Of course, such material cannot look, for example, like an antique tree, but against the background of logs and natural material it will look quite relevant and will fit into the interior.

There are a lot of options for solid doors, namely finishes. This can be a pattern of boards and slats, antique, volumetric panel, with carvings, everyone can choose their ideal option.

Security

When installing the door, be sure to follow the safety rules. Doors made of wood should be treated with special tools. Regarding glass, doors should have smooth edges or caps, but soft.

Entrance door

Equally important is the quality of the front door from the street - this is, first of all, protection and, of course, the safety of heat in the room. Most often, a metal door to the bathhouse is selected from the point of view of security, which is completely justified. However, if such material is chosen, care must be taken to insulate the door in the bath, because thermal insulation is also important. There is a minus to this design, if a person comes out to cool out of the bathhouse, upon returning to touch such a door in severe frost, he may freeze to it. This problem can easily be solved, for example, use the lining from the lining, and varnish from the top. Antique doors look beautiful.

For street doors, as a thermal insulation, you can purchase a special canvas made of solid wood, but you can easily make thermal insulation yourself. To do this, take 2 shields, between which bars are filled, and all voids are filled with insulation. After which they are interconnected, and a bar is printed around the perimeter.

If the safety and security of the building is not the key, then you can install plastic doors. There is a large selection of colors, they are quite resistant to temperatures, moisture and water.

And another option is the frame door, where the frame can be aluminum. Inside, good insulation is required, and the outside is sheathed in wood. It can be pine or aspen upholstery, wood processing is very important here.

Doors for washing

Doors are smaller in the wash room or in the rest room. Here the main condition is that a minimum of moisture is passed through the doors. The approximate width of such structures is 60cm. There are several options for the material that can be used in such rooms.

If you give preference to a tree, then you must take into account such a factor as moisture. When installing the door, you must leave a gap between the canvas and the frame. If the standard clearance for apartments is 2 or 3 mm, then at least 5 mm is required here. This is because the door will swell due to moisture, and it simply will not be possible to close it. You can choose a pine, linden or other tree, it is important to properly process it. Choosing a tree, there are many options for how to decorate it. The most common options are carving, Christmas tree, antique.

Reliability and practicality will ensure the construction of glass. The appearance options are much smaller, but with respect to the characteristics they are more profitable. They are not affected by moisture and they do not increase or decrease in size, unlike pine trees. They are made of heat-resistant glass, and it is difficult to break them, therefore they serve for a long time. Fingerprints and stains will not remain on the surface, as on ordinary glass, thanks to the treated surface.

And another option is plastic. Of course, many people avoid such material, since against the background of natural wood and logs this material looks unnatural. However, if we talk about the decor, then such designs can be purchased in different colors, for example, under the tree. In addition, the appearance may resemble different textures, for example, antique wood, at first glance it does not even differ from natural material.

If we talk about reliability and practicality, they hold heat well and are not susceptible to moisture. You can choose sliding doors that perfectly preserve free space.

Which is better to choose?

As you can see, each of the materials has its advantages and disadvantages. The most important thing when choosing to pay attention to safety, because the bath is, first of all, the high temperature, and it is very important that all the components of the building could not harm the health. If we talk about the material for the door to the steam room itself, then we should pay attention to such a moment as visibility.

A blank canvas made of wood will not allow viewing the room, and if a person becomes ill, then it will be impossible to provide first aid.This does not mean that a completely transparent door should be installed, but if at least the silhouette of a person is visible, it is much safer. If you still want to maintain the style and install a wooden canvas, you can combine two materials for safety, for example, make a window of glass.

If we compare the durability of the materials, then glass is the leader here, it requires a minimum of maintenance and does not need maintenance work. However, on the other hand, a natural and beautiful material such as wood, after simple grinding, will look like new. The financial side and individual preferences are more likely to be important here.

How to choose and which door will be installed is a completely individual matter, because there really is a choice. If during the selection all important points are taken into account, then such a door will serve for a long time and reliably. The most important thing is to think over security issues, in the case of wood, processing is mandatory, and the glass should have soft caps and smooth edges.