How to make a lamp from a bottle of wine with your own hands

We all like beautiful lights. This is a great option to transform the interior of almost any room. And what is most interesting, such unusual decor items can be done with your own hands. For example, you can use old bottles of wine and turn them into lamps, adding a magical mood to your living room or bedroom.

Collect all the empty wine bottles that you have and choose 2 or 3 of them the same. Of course, you can take different ones, but from the same you get an integral composition.

Labels must be carefully removed from each bottle, if this process is difficult, you can use a sponge and warm water.

Bottles must be thoroughly washed both externally and internally. And then dry well.

On the bottle, it is necessary to mark the place where the wires will come out. It is preferable to choose for this a side wall near the bottom. It will look much neater and more aesthetic.

In order to make a hole in a glass bottle, you will need water, so prepare it in advance.

Prepare and connect the power tool with which you will drill a hole in the bottle. For such delicate work you will need a drill with a diamond crown.

We form a clay cake and put it on the mark where we will drill. During the drilling process, it will be necessary to occasionally slowly and gently add water to the hole. This is necessary so that the drill and the bottle itself do not overheat.

Drill slowly and carefully. After the drilling process is completed, remove the clay and clean the bottle.

So that the hole obtained is smooth and it is impossible to hurt yourself, you need to clean it with sandpaper, grain size 150 mm.

After processing the hole with sandpaper, we clean the bottle again.

We prepare LED lights or garlands. A composition of two bottles with one-color lights and one with multi-colored looks very beautiful. But it all depends on your taste and preference.

Pull garlands into the resulting hole so that the wires for connection remain outside.

It is optimal, although not necessary, to insert a rubber gasket into the drilled hole in the bottle. This will protect against accidental injuries associated with the edges of the hole. In addition, the hole will take on a completely honorable appearance.

After installing the gasket (optional, of course), you must carefully secure the wires.

The final step will be to connect a new lamp to the outlet. We turn on and enjoy the beautiful sight that envelops not only the room, but also our soul with a pleasant enchanting light.

If you wish, you can complement the composition with a candle. And you can decorate the neck of the bottle - lamps with ribbons or strings. Imagine and decorate, everything is in your hands.