Do-it-yourself false fireplace: interesting workshops and interior decor options

In the design of an apartment or your own house literally every detail plays a role. But nevertheless, it is very important to create the most comfortable atmosphere. This effect can be achieved in various ways, however, we suggest paying attention to the false fireplace. Such a design, of course, will not heat the room and will not allow you to enjoy the crack of firewood. Nevertheless, it is a great alternative for modern apartments, where there is simply no way to install a real fireplace.

Foam Fireplace

Perhaps one of the simplest options for creating a decorative fireplace is to use polystyrene as the basis. This makes the process much easier, so this workshop is suitable even for beginners.

Necessary materials:

• Styrofoam;
• acrylic primer;
• PVA glue;
• scissors;
• brush;
• acrylic lacquer;
• masking tape;
• Toothpicks
• golden acrylic paint;
• braid for decor;
• knife;
• putty knife;
• centimeter;
• decor.

Four foam blanks are cut from foam. These will be the front and rear walls, as well as the side parts. Since the foam is rather poorly fixed with glue, we additionally use toothpicks.

We connect the side parts with the walls.

Apply a thin layer of acrylic primer to the joints and leave to dry.

On the inside, we mark out where the firebox should be. Carefully cut it with a sharp knife.

If necessary, additionally fix the parts with toothpicks.

We also fix the parts along the upper and lower edges with masking tape.

Apply a primer to the frame and leave to dry. Dip the braid for decor in glue and attach it along the cut for the firebox.

Lightly apply a golden color paint to the braid. In the corners we glue the decor in the form of flowers.

From the polystyrene, we cut another preform. We attach it on top of the fireplace, like a shelf. We cover the sides of the workpiece with gold paint.

Getting to decorating. If desired, glue various snowflakes, braid. You can also make decoupage on the sides of the raised fireplace. We cover the entire surface with acrylic varnish and leave to dry.

In the interior you can put a decorative candlestick or just a few candles. It looks very beautiful and unusual.

Decorative fireplace for the New Year

On the eve of the New Year, it's time to make a beautiful fake fireplace with your own hands. It will look great as a decorative element near the Christmas tree.

Such materials will be needed:

• penoplex;
• knife;
• jigsaw;
• white paint;
• brush;
• sandpaper;
• additional decor;
• stencil with a pattern of bricks;
• pencil or pen;
• ruler.

On the foam sheet, we make the markup and cut out the window for the fireplace.

To remove irregularities, we process the edges with sandpaper.

We take a stencil in the form of a brick and circle it with a pencil or pen, imitating brickwork.

Carefully, using a knife, cut through each brick according to the marking. Remember that recesses should be minimal.

We process the entire surface of the fireplace with sandpaper and thus erase the entire markup.

We paint the decorative fireplace with white paint and leave it to dry for several hours.

We install a fireplace near the wall and proceed to decorating. To do this, you can use spruce twigs, tinsel, beautiful candles and other holiday attributes.

We recommend sticking to one color scheme, then the composition will be more harmonious.

Cardboard raised fireplace

Perhaps one of the easiest to perform will be a cardboard fireplace. It will take quite a bit of time to create it, but the result is worth it.

Prepare the following:

• big box;
• white paint;
• PVA glue;
• baseboard;
• polystyrene decor;
• pencil;
• masking tape;
• stationery knife;
• ruler;
• paper.

We make a drawing for the fireplace on a sheet of paper or use the presented option in the photo.

Transfer the drawing to a cardboard box and cut out the main part with a clerical knife. We bend the edges of the box inward and fix it with masking tape.

We glue the baseboard and polystyrene decor to a raised fireplace.

We glue together two pieces of cardboard. This is necessary in order to make the top of the fireplace. Glue the workpiece to the main part. We paint the fireplace with white paint.

If necessary, apply another coat of paint and leave to dry completely.

We put the fireplace against the wall and install various decorative elements on it. If desired, you can make themed decor. For example, for the New Year or any other holiday.

Drywall Drywall

You can make a beautiful, most natural false fireplace without any problems yourself.

In the process you will need the following:

• metal profiles;
• electric fireplace (optional);
• dowels;
• drywall;
• self-tapping screws;
• chipboard countertop;
• glue for a tile;
• decorative brick;
• putty;
• hammer drill;
• screwdriver;
• pliers;
• Bulgarian.

To begin with, we make a drawing based on the desired size of the fireplace. We transfer part of the marking to the wall.

From the metal profile we assemble the frame for the fireplace, according to our own drawing.

Ready frame sheathed with drywall.

We prime the entire surface of the false fireplace and only after that proceed with the decoration. It is best to attach decorative brick with tile glue.

We attach the countertop to the top of the fireplace.

To create a more natural effect, you can install an electric fireplace inside. But since its cost is quite high, this is not necessary at all. For decor, you can safely use beautiful candles, spruce twigs or flowers. It looks no less attractive.

False fireplace in the interior: original design options

 

 

The process of creating a decorative fireplace is very laborious. This is not surprising, because in the process a large number of materials and tools are used. But do not rush to be upset, as a result you will get a beautiful fireplace, which will become a stylish decoration of your apartment.