Decorative pond: a spectacular decoration of your garden

A pond in the country is beautiful, fashionable and even very prestigious. And if not everyone can build a full-fledged pool (after all, this is a rather troublesome and costly task), then any connoisseur of beauty and nature in the garden can build a compact decorative pond.However, you should not rely on the fact that it is enough to simply dig a hole and fill it with water, which will soon be absorbed into the soil and form an ordinary puddle. To achieve the desired result, you need a competent approach that requires certain material investments.

All the necessary materials can be purchased at any construction supermarket, and with the work technologies can be found via the Internet. Whether it is a place for spending family leisure time or decorating a pretty lawn, the technical parameters, sizes, manufacturing technology and filling of the reservoir will depend on the goals. More on this later ...

Do-it-yourself decorative pond in the country: what is important to know?

A decorative pond can be made quite shallow and small, because it is much more important - aesthetic admiring a mirror of water surrounded by plants and stones. First of all, care should be taken to create a reliable waterproofing layer that will retain water in the pit.

It is necessary to extract the soil and give the future reservoir the desired depth and configuration by tamping the walls well, before that they fill them with a layer of sand and water it from above. If you want a deep pond with fish, the walls should be constructed in the form of terraces going down. This will result in a more reliable addition, not prone to landslides. For the artistic decoration of a pond, horizontal sections can be decorated with flowerpots with plants and other natural and decorative elements.

It is important to provide waterproofing. For this, any waterproof materials are suitable - ruberoid, plastic film, PVC fabric.Today, technology offers a reliable sealant - polyurea, with which you can make waterproof any fabric and even paper. To isolate the foundation pit well, a thin layer of this composition will suffice.

Overlap the waterproofing sheets, making sure that in the overlap all the layers are snug against each other. Thus, they will not displace under the pressure of water and will reliably hold it.

The protruding edges of the film are laid out and covered with soil. Depending on the design, you can put pots with beautiful plants on them, lay stones or build an alpine hill on the edge of the reservoir.

Plastic container - simple and practical

The production of dimensional polyethylene products offers ready-made containers for arranging ponds and pools. Such bathtubs have their advantages: they are easy to install, easy to transport, withstand heavy loads, wash well, have different shapes and sizes.

The correct installation of such a reservoir involves the formation of the most even bottom of the recess, followed by tamping. Otherwise, there are risks that the weight of the water will break the bath, which will then be practically impossible to restore.

The openings between the outer walls of the tank and the edges of the pit are covered with sand and compacted with water and rammers. High-quality backfill is a guarantee that when filling with liquid the structure will not be ruined.

Such a solution to a decorative reservoir is the least labor-intensive in manufacturing and maintenance. Having previously lowered the water, the container is very easy to clean from dirt, and strong sides will not allow the soil to crumble.

You can design a plastic structure as a natural pond, or you can create a central object for a picnic area. A practical pond can also serve as a safe pool for children, since the plastic has a dark color that perfectly accumulates heat from the sun.

Capital construction

For adherents of solid and solid solutions, capital structures are more suitable. In this case, a reliable structure is erected from concrete, which involves the maintenance of a significant amount of water and can be used for various purposes - to create a resting place in a summer cottage or as a large pond for fish farming.

One way or another, a decorative pond can be built without any help and in one season. The prepared recess is reinforced with reinforced concrete: a thick wire or reinforcement is laid along its walls and bottom, tying it at the intersection or fastening by welding. The finished structure is fixed with studs and a solution of concrete is poured. The screed should completely harden, after which the entire surface of the pool is treated with sealant. The last stage is the design of the sides.

Pond waterfall: spectacular sight

The flowing water at the reservoir looks especially beautiful and bewitching. To achieve this effect, you will need special equipment that will ensure the movement of water. Waterfalls, fountains, water mills - a great option for your site.They use different pumps with filters, which at the same time purify the water.

It is possible to make a decorative pond with a waterfall when there are elevation differences on the territory of the summer cottage. Thus, it is enough to divide the pond into two parts and make a small dam at the place of their junction.

If the relief is not biased, you can use additional decorative objects - vases, bowls, a variety of thematic compositions. Today, the market offers an abundance of ready-made elements for decorating ponds, where everyone can choose the option to their taste.

Pond Care

It is important to ensure that the pond always remains clean and fresh. Therefore, it must be regularly looked after and cleaned - from time to time drain all the water and wash the container thoroughly. In order for the water to always remain transparent, it is necessary to use special means to prevent the development of microflora. They are absolutely environmentally friendly and safe, and you can buy them at any specialized supermarkets.

With the transition to the winter season, it is better to drain the water from a decorative reservoir (if there is a high probability of its complete freezing). Bursting walls is very difficult to restore. There is a high probability that the damaged tightness will lead the reservoir to complete unsuitability.