Decking - decking

The arrangement, repair, reconstruction of a private house today is carried out using the most modern technologies and materials. You can replace and update almost any part of the design and decoration. You only need to know what is more expedient to put in place of an obsolete or worn out one. The building materials market offers a huge variety in which you can always find the right option.

If with walls, windows, ceilings and other parts and elements of the house everything is more or less clear, then what is better to make the floor on the porch or open veranda - often becomes an acute question among households. The concrete coating is slippery and not very aesthetic, tile it looks inappropriate on the veranda, wooden materials are short-lived due to frequent dampness. Therefore, they leave the finish of the porch in the end. And meanwhile - it is something that is the hallmark of the house and should look accordingly.

Hard living porch ...

To accurately determine which material is best for floors on the porch and porch, you need to understand what the operating conditions require of it. After all, the wear time of any floor depends on the environment in which it will be used.

Since most of the porch or the unglazed veranda have a maximum of protection from the shelter, it means that they are constantly open to natural influences, a significant part of which are far from favorable. The sun may be soft and gives warmth, but its rays carry ultraviolet light and are too hot. Rain moisturizes a dry surface, but excess moisture is a good environment for the development of fungus and rot. Frost freezes water that has penetrated the pores of the material, and its structure is destroyed by ice microcrystals.

In addition to natural factors, the floors of the veranda and porch are daily exposed to a large load from people moving in their space. The surface is abraded, objects falling suddenly can crack the hard coating, the heels of modern shoes made of superhard materials also contribute to the destruction of the surface.

And, as usual, the appearance of the floor has its own requirements. Few people will like a porch with a simple concrete screed on the floor. Each householder wants to enter the house, already on the verge of a glance to enjoy the beauty of the home. Therefore, the decorative properties of the material for the manufacture of floors on the porch or porch are not the last value when choosing.

Alternative to tradition

Well-known and well-known traditional materials - concrete, ceramic tiles, wood - can quite successfully play the role of flooring in open spaces. Their advantages and disadvantages have already been so well manifested over the years of their use that it does not even make sense to list them again.

Modern manufacturers took into account all the moments that affect the performance properties of the material for the floor, and offered a unique solution to today's architects and builders. This amazing material appeared at the junction of two industries - wood processing and the polymer industry. And in itself, it combines the properties of both of its components at once - wood and plastic.

The name of this new material - wood-plastic composite - decking. In our building materials markets, it is well known as decking. And it is used, as a rule, for the installation of coatings on open terraces, recreational areas, spaces near ponds and pools. In general - wherever the conditions for the material are quite severe.

What makes this material so special that it has become very popular today and is becoming more and more popular, despite the fact that it is quite expensive? And why should you prefer it to all other familiar and traditional ways of decorating open areas of home ownership?

Decking - decking and its properties

Due to the duality of its origin, decking has the properties inherent in both of its components. From the tree he took decorativeness and texture, low heat capacity and pleasant tactile sensations. And plastic gives composite products high strength and resistance to abrasion, the ability to withstand high humidity and temperature extremes, good protection from pests and parasites.

Decking manufacturing technology is surprisingly simple and does not require unique equipment and raw materials. The composite is based on highly chopped wood fiber, which is a kind of filler. It is mixed with the polymer to obtain a homogeneous mass. And from it already molded products that will be used in construction. The most common form of decking is a board. It can produce both solid and lightweight, with cavities inside. It is possible to manufacture products of any configuration, since the mass of the composite is sufficiently plastic to fill any form qualitatively.

The terrace board is very durable, lends itself well to processing, and tolerates heavy loads. It does not require a solid base during installation and it can be laid on logs with a sufficiently large gap. Outwardly, it is very similar to a solid wood board, so it can be safely replaced with ordinary wood in any design.

Comparing characteristic

Decking, unlike ordinary wooden boards:

• does not give chips;
• does not split in fibers;
• does not warp;
• does not dry out;
• does not get wet;
• does not decay;
• not spoiled by rodents and pests.

It differs from pure plastic:

• beautiful natural texture;
• pleasant to the touch;
• does not chill when touched;
• does not slip.

It turns out that decking has not only become something between wood and plastic, it has acquired other characteristics that are not characteristic of any of the source codes. Thanks to these properties, a wood-plastic composite can be successfully and joyfully used by residents of the house as a convenient and beautiful floor on the porch or porch.

Consider what is decking on video